Skip to content
EXOFILM

Clear PPF

Exceptionally deep, high-gloss finish

GLOSS 9 is an advanced paint protection film engineered to provide durable, long-lasting protection while enhancing the vehicle’s original appearance with an exceptionally deep, high-gloss finish. Its high-density TPU construction helps shield the paint from stone chips, debris, scratches and environmental exposure. Heat-healing technology helps restore minor surface marks, while its hydrophobic surface repels water, dirt and contaminants.

EXOFILM Gloss 9
Gloss
>96 GU
Tensile
>26 MPa
Elongation
≥370%
Warranty
10 yr

Performance, measured.

Source: EXO-G9-TDS · Rev 1.0 · November 2026

Gloss level

96GU · 60°
0 · FlatTypical value100 · Mirror

Performance meters

  • Tensile strength>26 MPa
    045 MPa
  • Elongation at break≥370%
    0500 %
  • Film thickness8.5 mil · 216 μm
    0250 μm
  • UV aging test6000 hours pass
    06,000 h

Tick marks show the other films in the EXOFILM range

Warranty

10years

Self-healingHeat-activated

Stretch test

Elongation185%
Length2.9×
Rated limit≥370%

Peel adhesion build

Adhesion builds as the film settles, so edges stay put once cured.

Compare the range

  • Gloss 9
    >96
  • Gloss 8
    >95
  • PCU
    >95
  • Gloss 7
    >93
  • Defense 8
    >92
  • Gloss Black
    >92
  • Luminous 30
    >92
  • Matte
    13–16
  • Matte Black
    13–16

Key features

  • Exceptionally deep gloss

    >96 GU for a deep, high-gloss finish that enhances the original paint.

  • Aliphatic TPU construction

    8.5 mil TPU with >26 MPa tensile strength shields paint from stone chips and road debris.

  • Heat-activated self-healing

    Minor surface marks disappear when exposed to heat.

  • Hydrophobic ExoCoat top coat

    Repels water, dirt and contaminants for easier maintenance.

  • StainGuard protection

    Resists staining and yellowing; no detrimental effect from common chemicals.

Specifications

All datasheet values (15)
Base material
Aliphatic TPU
TPU thickness
8.5 mil
Colour
Transparent
Gloss
>96 GU (Typical value)
Self-healing
Heat
Tensile strength
>26 MPa
Elongation
≥370%
Elongation track end
500%
Peel adhesion, 20 min
1295 gf/inch
Peel adhesion, 24 h
1683 gf/inch (+30%)
UV aging test
6000 hours pass
Capsheet
PE (blue)
Temperature resistance
−40 °C ~ 120 °C
Application
55–90 °F (13–32 °C), wet only
Warranty
10 years

Stain resistance

No detrimental effect

Acetone, gasoline, Armor All, diesel, motor oil, soap & water, 100% isopropyl alcohol. Immerse for 35 min, check after 24 h for change.

Weathering

ΔE < 2, > 85% gloss retention

Heat aging, xenon weathering, EMMAQUA aging: UV, IR and humidity exposure reflecting 3 years of real-life use.

Technical datasheet · EXO-G9-TDSPDF ↓

Inside Gloss 9.

Loading construction
ConstructionGloss 9 · Gloss 8

Layer names are taken directly from the EXOFILM technical datasheets. Scroll to separate the layers, or select one to read its role.