Skip to content
EXOFILM

Headlight PPF

Smoked headlight protection film

LUMINOUS 30 is a high-performance headlight protection film engineered for heavy-duty defence and sleek styling. Its 30% tint gives front and rear lights a subtle, modern smoked look without compromising illumination or beam output, and shields lenses from debris, stone pitting, micro-abrasions and UV-induced yellowing or clouding.

EXOFILM Luminous 30
Gloss
>92 GU
Tensile
>21 MPa
Elongation
≥330%
Warranty
5 yr

Performance, measured.

Source: EXO-LUM30-TDS · Rev 1.0 · November 2026

Gloss level

92GU · 60°
0 · FlatTypical value100 · Mirror

Performance meters

  • Tensile strength>21 MPa
    045 MPa
  • Elongation at break≥330%
    0500 %
  • Film thickness7.5 mil · 191 μm
    0250 μm
  • UV aging test6000 hours pass
    06,000 h

Tick marks show the other films in the EXOFILM range

Warranty

5years

Self-healingInstant · no heat needed

Stretch test

Elongation165%
Length2.6×
Rated limit≥330%

Peel adhesion build

Adhesion builds as the film settles, so edges stay put once cured.

Compare the range

  • Gloss 9
    >96
  • Gloss 8
    >95
  • PCU
    >95
  • Gloss 7
    >93
  • Defense 8
    >92
  • Gloss Black
    >92
  • Luminous 30
    >92
  • Matte
    13–16
  • Matte Black
    13–16

Key features

  • 30% dark smoke tint

    Modern smoked look for front and rear lights without reducing beam output.

  • Aliphatic TPU construction

    7.5 mil TPU with >21 MPa tensile strength shields lenses from stone chips and road debris.

  • Instant self-healing

    Minor surface marks recover without the need for applied heat.

  • Hydrophobic ExoCoat top coat

    Repels water, dirt and contaminants for easier maintenance.

  • StainGuard protection

    Resists staining and yellowing; no detrimental effect from common chemicals.

Specifications

All datasheet values (15)
Base material
Aliphatic TPU
TPU thickness
7.5 mil
Colour
Dark smoke
Gloss
>92 GU (Typical value)
Self-healing
Instant
Tensile strength
>21 MPa
Elongation
≥330%
Elongation track end
500%
Peel adhesion, 20 min
1243 gf/inch
Peel adhesion, 24 h
1620 gf/inch (+30%)
UV aging test
6000 hours pass
Capsheet
PET
Temperature resistance
−40 °C ~ 120 °C
Application
55–90 °F (13–32 °C), wet only
Warranty
5 years

Stain resistance

No detrimental effect

Acetone, gasoline, Armor All, diesel, motor oil, soap & water, 100% isopropyl alcohol. Immerse for 35 min, check after 24 h for change.

Weathering

ΔE < 2, > 85% gloss retention

Heat aging, xenon weathering, EMMAQUA aging: UV, IR and humidity exposure reflecting 3 years of real-life use.

Technical datasheet · EXO-LUM30-TDSPDF ↓

Inside Luminous 30.

Loading construction
ConstructionGloss 7 · Defense 8 · Gloss Black · Luminous 30

Layer names are taken directly from the EXOFILM technical datasheets. Scroll to separate the layers, or select one to read its role.