Skip to content
EXOFILM

Matte PPF

Deep, non-reflective matte finish

Matte Paint Protection Film is an advanced automotive film designed to shield your vehicle’s exterior while delivering a bold, stealthy style. It transforms the surface into a deep, non-reflective matte finish, with a water-repellent surface and a heat-activated layer that lets minor scratches self-heal.

EXOFILM Matte
Gloss
13–16
Tensile
>25 MPa
Elongation
≥360%
Warranty
10 yr

Performance, measured.

Source: EXO-MATTE-TDS · Rev 1.0 · November 2026

Gloss level

13–16GU · 60°
0 · FlatMatte · 20–25 satin100 · Mirror

Performance meters

  • Tensile strength>25 MPa
    045 MPa
  • Elongation at break≥360%
    0500 %
  • Film thickness7.5 mil · 191 μm
    0250 μm
  • UV aging test3000 hours pass
    06,000 h

Tick marks show the other films in the EXOFILM range

Warranty

10years

Self-healingHeat-activated

Stretch test

Elongation180%
Length2.8×
Rated limit≥360%

Peel adhesion build

Adhesion builds as the film settles, so edges stay put once cured.

Compare the range

  • Gloss 9
    >96
  • Gloss 8
    >95
  • PCU
    >95
  • Gloss 7
    >93
  • Defense 8
    >92
  • Gloss Black
    >92
  • Luminous 30
    >92
  • Matte
    13–16
  • Matte Black
    13–16

Key features

  • Transparent matte finish

    Gloss 13–16 (matte), 20–25 (satin) for a deep, non-reflective look.

  • Aliphatic TPU construction

    7.5 mil TPU with >25 MPa tensile strength shields paint from stone chips and road debris.

  • Heat-activated self-healing

    Minor surface marks disappear when exposed to heat.

  • Hydrophobic ExoCoat top coat

    Repels water, dirt and contaminants for easier maintenance.

  • StainGuard protection

    Resists staining and yellowing; no detrimental effect from common chemicals.

Specifications

All datasheet values (15)
Base material
Aliphatic TPU
TPU thickness
7.5 mil
Colour
Transparent matte
Gloss
13–16 (Matte · 20–25 satin)
Self-healing
Heat
Tensile strength
>25 MPa
Elongation
≥360%
Elongation track end
500%
Peel adhesion, 20 min
1282 gf/inch
Peel adhesion, 24 h
1660 gf/inch (+29%)
UV aging test
3000 hours pass
Capsheet
None
Temperature resistance
−40 °C ~ 120 °C
Application
55–90 °F (13–32 °C), wet only
Warranty
10 years

Stain resistance

No detrimental effect

Acetone, gasoline, Armor All, diesel, motor oil, soap & water, 100% isopropyl alcohol. Immerse for 35 min, check after 24 h for change.

Weathering

ΔE < 2, > 85% gloss retention

Heat aging, xenon weathering, EMMAQUA aging: UV, IR and humidity exposure reflecting 3 years of real-life use.

Technical datasheet · EXO-MATTE-TDSPDF ↓

Inside Matte.

Loading construction
ConstructionMatte · Matte Black

Layer names are taken directly from the EXOFILM technical datasheets. Scroll to separate the layers, or select one to read its role.