Clear PPF
Next-generation polycarbonate urethane
Polycarbonate urethane is the next generation of PPF materials, with stronger anti-yellowing and anti-staining than traditional TPU. A thermal self-healing top coat recovers 100% from light marring, while a >95 GU surface delivers a deep, brilliant, show-quality finish.

- Gloss
- >95 GU
- Tensile
- 15.9 MPa
- Elongation
- 328%
- Warranty
- 10 yr
Performance, measured.
Source: WB-PCU-TDS · Rev 1.0 · October 2026Gloss level
Performance meters
- Tensile strength15.9 MPa045 MPa
- Elongation at break328%0500 %
- Film thickness196 μm0250 μm
- UV aging testNot stated06,000 h
Tick marks show the other films in the EXOFILM range
Warranty
10years
Stretch test
Peel adhesion build
Adhesion builds as the film settles, so edges stay put once cured.
Compare the range
- Gloss 9>96
- Gloss 8>95
- PCU>95
- Gloss 7>93
- Defense 8>92
- Gloss Black>92
- Luminous 30>92
- Matte13–16
- Matte Black13–16
Key features
Next-generation PCU
Polycarbonate urethane, the next generation of PPF materials beyond traditional TPU.
Stronger anti-yellowing
Greater resistance to yellowing than traditional TPU.
Stronger anti-staining
Marker wipes away trace-free after 10 seconds.
100% thermal self-healing
1 kg brass brush, 10 scrubs, then 50–70 °C water for 1 minute: full recovery.
Specifications
All datasheet values (14)
- Base material
- Polycarbonate urethane
- Total thickness (±5%)
- 196 μm
- Colour
- Transparent
- Gloss
- >95 GU (Typical value)
- Self-healing
- Thermal
- Tensile strength
- 15.9 MPa
- Elongation
- 328%
- 100% modulus
- 5.9 MPa
- Elongation track end
- 400%
- Peel adhesion, 20 min
- 15.9 N/inch
- Peel adhesion, 24 h
- 18.1 N/inch (+14%)
- UV aging test
- Not stated
- Capsheet
- Capsheet top layer
- Warranty
- 10 years
Stain resistance
No detrimental effect
Acetone, gasoline, Armor All, diesel, motor oil, soap & water, 100% isopropyl alcohol. Immerse for 35 min, check after 24 h for change.
Weathering
ΔE < 2, > 85% gloss retention
Heat aging, xenon weathering, EMMAQUA aging: UV, IR and humidity exposure reflecting 3 years of real-life use.
Inside PCU.
Layer names are taken directly from the EXOFILM technical datasheets. Scroll to separate the layers, or select one to read its role.



